Instructions / Assembly

Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw(D) on mounting bracket, no less than 2" from wire end. Tighten ground screw(D). If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw(D) on mounting bracket. Tighten ground screw(D).
5. Orient the ceiling canopy(E) so that the mounting screws(C) protruding from the mounting bracket go into
the holes in the canopy,then secure it with the provided screwed balls(F).
6. Put the set screw(G) by the Wrench(H) to tighten.
7. Put the shade(J) on to the Socket(I), then screw the socket ring(K) into the socket.
8. Install bulb(L). Be sure to use light bulb(L) with wattage no greater than specified on this
fixture. Always make sure that electrical current is turned off before changing bulbs.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR LED BULB MAX 12 -WATT
THERE IS LED 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP
4/4