Instructions / Assembly

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

Connect, Hot, Black or Red Outlet Supply Wire to: Connect, Neutral, White Outlet Supply Wire to:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square

shaped and ridged and the hot wire will be round in shape and smooth.（See

Illustration on left.）

Step

1. Slide Arm-2 (B) into Arm-1 (A). Slide Arm-3 (C) into Arm-4 (D).

2. Slide Arm-1 (A) into Arm-4 (D), Lock Arm-1 (A) and Arm-4 (D) with Fixture screws (F).

3. Put the lamp body on the wall and make a mark at the hole of the lamp body with a marker pen.

Lock and fix the lamp body to the wall with Wall Anchors (G) and wooden screw (H).

Place the shade (J) on the socket (I), and then lock the shade (J) with socket ring (K).

Lock the Bulb (L) to the socket (I).

4. Loosen the upper handle (E) to adjust the shade (J) to move up and down and left and right, loosen

the lower handle (E) to adjust the desktop (C) to move up and down and left and right.

PLEASE USE TYPE "A" BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE IS 1PC

9-WATT LED BULB IN THE BOX.

ENJOY YOUR LAMP

2/2