Instructions / Assembly

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
Step 1
1.Cut off the plug with scissors, leaving the exposed wire 8" in length.
Note: Cuting the cord so that they are at least 6
inches (152.4mm) long within an outlet box and
extend max. 2.4m long measured from the point
where the cord emerges from the body of the lamp.
Step 2
1.Connect the power cord of the lamp to the positive and negative poles in the household power box.
2. Lock the mounting plate (B) on the outlet box with the mounting screw (A).
3. Connect the lamp body (E) to the mounting plate (B) and lock it with fixture screws(D) .
Step 3
1. Lock the bulb (F) to the socket .
2. Swing the arm (G) left and right, can adjust the direction of shade (H) .
E
D
A
B
F
H
E
H
H
F
H
E
H
H
4/5