Instructions / Assembly

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
Step 1
1.Cut off the plug with scissors, leaving the exposed wire 8" in length.
Note: Cuting the cord so that they are at least 6
inches (152.4mm) long within an outlet box and
extend max. 2.4m long measured from the point
where the cord emerges from the body of the lamp.
Step 2
1.Connect the power cord of the lamp to the positive and negative poles in the household power box.
2. Lock the mounting plate (B) on the outlet box with the mounting screw (A).
3. Connect the lamp body (E) to the mounting plate (B) and lock it with fixture screws(D) .
Step 3
1. Place the shade (H) on the lamp body (E), and then lock the shade (H) with the socket ring (G) .
2. Lock the bulb (F) to the socket .
3. Loosen handles (K) to swing the arm (J) up and down, can adjust the direction of shade (H) .
4. Loosen handles (I) to swing the shade (H) up and down, can adjust the direction of shade (H) .
Step 1
4/5