Installation & Assembly
787
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other)
as a feature to reduce the risk of electric shock. This plug will
t in a polarized outlet only one way. If it does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied
electrician.
Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp
can be fully inserted into the extension cord receptical.
* Switch power off and remove plug from the wall outlet before
replacing the bulb.
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials. Place
lamp base on a level surface.
2. Remove ange (A) from socket (C).
3. Place shade (B) onto socket (C). Thread ange (A) back
onto socket (C).
4. Insert 1-150W Max., Type A, medium base bulb into
socket (C).
5. Remove protective plastic fom plug (D).
6. Insert plug (D) into wall outlet.
7. Control power to the lamp by rotating the switch on
socket (C).
**To clean, use a soft cloth only. Do not use any chemical or
abrasive cleaners.**
ASSEMBLY INSTRUCTIONS FOR YOUR
HARLEQUIN FLOOR LAMP
(A)
(B)
(C)
(D)