Use and Care Manual

6
Maintenance Procedure:
Manual Wire Wrapping Tools
Periodic Maintenance:
The only required maintenance is periodic greasing of the gear
assembly. The interval is dependent on use. For reference we suggest
every 50,000 wraps or every 6 months which ever comes rst.
Tools Required:
Philips Head Screwdriver.1.
Synthetic Grease (Such as: Chemplex 940 from NFO Technologies).2.
Disassembly:
Using a Philips head screwdriver, remove the 5 screws that hold1.
the housing together. Note the type and location of the screws.
Turn the gun over and lay it down on a at surface so the nose2.
piece is facing left. Separate the housings and remove the collet
and nose piece. Note: Use a at head screwdriver to separate the
housings.
8-32 x 5/8
8-32 x 3/8
NOSE PIECE
6-32 x 5/8