Specification

Tel [phone] | Fax [phone] | jonard.com
Premier Tool Manufacturer Since 1958
Flush Cut Kevlar® Cutters - JIC-190 | Data Sheet
SPECIFICATIONS
HANDLE TYPE
TPR (Thermoplastic Rubber)
MATERIAL
High Carbon Steel
JAW LENGTH
0.87” (22.1 mm)
OVERALL LENGTH
5.79” (14.7 cm)
WEIGHT
0.150 lb (68 g)
UPC #
811490018730
The Jonard Tools JIC-190 Flush Cut Kevlar® Cutters are designed to cut Kevlar®, cabling insulation, tape, cable ties,
and other materials flush to the surface. These cutters feature the following:
• Thin-nose jaws provide easy access into tight places and allow for flush cutting of Kevlar® to the fiber jacket
• Serrated edge holds Kevlar® in place for clean and precise cutting
• Non-serrated blade can be sharpened for continuous long life
• Spring-loaded TPR (thermoplastic rubber) handles return to the open position for enhanced ergonomics and reduced
hand fatigue