SDS

Date Printed: 3/30/2015
4. First-aid Measures
FIRST AID - EYE CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical
attention. Do NOT allow rubbing of eyes or keeping eyes closed.
FIRST AID - SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation
develops or persists. Immediately flush skin with plenty of water for at least 15 minutes while removing clothing. Get medical
attention immediately. Wash clothing separately before reuse. Destroy contaminated shoes.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to
obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
FIRST AID - INGESTION: Swallowing less than an ounce will not cause significant harm. For larger amounts, do not induce
vomiting, but give one or two glasses of water to drink and get medical attention. If swallowed, do not induce vomiting. If victim is
conscious and alert, give 2 to 4 cupfuls of water or milk. Call a physician or poison control center immediately. Never give anything
by mouth to an unconscious person. Treat symptomatically and supportively. Do not induce vomiting unless advised by a physician.
Call nearest Poison Control Center or Physician immediately.
5. Fire-fighting Measures
EXTINGUISHING MEDIA:
Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: FLASH POINT IS TESTED TO BE GREATER THAN 200 DEGREES F. No unusual
fire or explosion hazards noted. Keep containers tightly closed.
SPECIAL FIREFIGHTING PROCEDURES: Water may be used to cool closed containers to prevent buildup of steam. Containers
can rupture and release highly toxic material if exposed to heat. Substance is non-combustible but reacts with many metals to form
explosive hydrogen gas. Use water spray to keep fire-exposed containers cool. Containers may explode when heated.
6. Accidental Release Measures
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Dispose of according to local, state (provincial) and federal
regulations. Do not incinerate closed containers. Avoid runoff into sewers and waterways. Provide ventilation and approach spill
from upwind using proper personal protective equipment as indicated in Section 8. Carefully neutralize spill with sodium bicarbonate
(NaHCO3). Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust.
7. Handling and Storage
HANDLING: Wash thoroughly after handling. Wash hands before eating. Avoid contact with eyes. Remove contaminated clothing
and launder before reuse. Use only with adequate ventilation. Follow all MSDS/label precautions even after container is emptied
because it may retain product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing.
STORAGE: Keep from freezing. Keep container closed when not in use. Store in a dry, well ventilated place. Keep container tightly
closed when not in use.
8. Exposure Controls/Personal Protection
Chemical Name CAS-No.
Weight %
Less Than
ACGIH TLV-
TWA
ACGIH TLV-
STEL
OSHA PEL-TWA
OSHA PEL-
CEILING
Sodium Dioctyl Sulfosuccinate 577-11-7 5.0 N.E. N.E. N.E. N.E.
Glacial Acetic Acid 64-19-7 5.0 10 ppm 15 ppm 10 ppm N.E.
Sodium o-Phenylphenate 132-27-4 1.0 N.E. N.E. N.E. N.E.
PERSONAL PROTECTION
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne
levels below recommended exposure limits. Prevent build-up of vapors by opening all doors and windows to achieve cross-
ventilation. Provide general dilution of local exhaust ventilation in volume and pattern to keep TLV of hazardous ingredients below
acceptable limits.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be
followed whenever workplace conditions warrant a respirator's use.
SKIN PROTECTION: Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
Use impervious gloves to prevent skin contact and absorption of this material through the skin.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
Page 3 / 6