User Manual

www.joinwit.com
8
Image 5-8
(5) button：
Delete data：in the data view status,press button to delete the current record.
2. Source mode
(1) button：Sequentially switching to the meter internal source wavelength.
(2) button：turn on or off the laser output in the source .(image 5-9)
Image 5-9
(3) button：After turning on the laser in the source module, press the button
to come to 0HZ, 270HZ, 1000HZ, 2000HZ in turn.(image 5-10)
Image 5-10
(4) button：in the source mode, open or close the automatic following switching
function of the source output wavelength.(image 5-11)
1