User's Manual

1. Snooze/Sleep Off Button
2. Alarm Set Button
3. Time Set Button
4. Sleep Set Button
5. Hour Set Button
6. Minute Set Button
7. On/Off/Auto/Alarm Selector
8. Tuning Control
9. Volume Control
10. Fm Antenna (For External
Antenna)
11. Auto Indicator
12. Main Plug (Ac Cord)
13. Alarm Off Button
14. Am/Fm Selector
AC POWER OPERATION
Before connecting to the power sup-
ply ensure that the supply corre-
sponds to the information on the
rating label on the bottom of the ap-
paratus.
WARNING
Disconnect the mains plug from the
supply socket when not in use.
To prevent fire or shock hazard do
not expose the apparatus to rain or
moisture.
CLOCK
A. Set the On/Off/Auto/Alarm Switch
(7) to ‘OFF’.
Connect the Mains Lead to the
power supply. The clock display will
flash on and off indicating a power
interruption and that the display
time is incorrect.
B. To set the correct time, press the
Time Set Button(3) and Minute Set
Button (6), or Hour Set Button (5),
together, until the correct time is
displayed.
C. Open the Clock Battery Compar-
tment door and fit a PP3 (or equiva-
lent) 9V battery. The purpose of this
battery is to store the information
relating to alarm time, and to keep
the clock functioning in the event of
disconnection from the mains sup-
ply or power interruption. Should
this occur, the clock will continue to
keep time, but will not display.
ALARM
A. To set the alarm time, press the
Alarm Set Button (2) and Minute Set
Button (6), or Hour Set Button (5),
together, until the required alarm
time is displayed.
B. Switch the On/Off/Auto/Alarm
Switch (7) to either ‘AUTO’ or
‘ALARM’ position for choice of wake
by radio or wake by buzzer respec-
tively. The Auto Indicator (11) will il-
luminate and alarm is now set to
activate at the required time.
C. The alarm can be temporarily
stopped for 9 minutes by pressing
the Snooze/Sleep Off Button (1).
This can be repeated until press the
Alarm Button (2).
D. The alarm will activate again
after 24 hours unless the
On/Off/Auto/Alarm Switch (7) is
set to ‘OFF’.
Note: When setting alarm time al-
ways remember to release the Mi-
nute Set or Hour Set or Hour Set
Button before releasing the Alarm
Set Button to ensure that the real
time will not be affected.
9