Manual
Table Of Contents
- Warranty
- Introduction
- Packaging & Contents
- Installation
- DPC-24/12 Circuit Board
- DPC-12 and DPC-24 Control Module Face Panels
- Dual DMX Input and Thru Connectors
- User Interface
- LCD Display
- Programming Switches
- 12 or 24 Local Buttons/Switches
- System Status - LED Indicators
- System Status - LCD Display
- Quick Programming Reference to System Configuration Menu Items
- Detailed Programming of System Configuration Menu Items
- Troubleshooting Reference
- Important Hard-key Information
www.johnsonsystems.com 23
JSI Serial Number: ___________________
Silicone Serial Number: _______________
Hard-Key Code: _____________________
JSI Serial Number: ___________________
Silicone Serial Number: _______________
Hard-Key Code: _____________________
JSI Serial Number: ___________________
Silicone Serial Number: _______________
Hard-Key Code: _____________________
JSI Serial Number: ___________________
Silicone Serial Number: _______________
Hard-Key Code: _____________________
Important Hard-key Information
DPC-12 or DPC-12 control modules may be shipped with an invalid hard-key code of 000000.
A valid hard-key must be entered before the run time (RTIME) counter reaches 2160 hours / 90
days. If the run time expires without a valid hard-key, the LCD display will show a runtime counter
error (RTC ERR!) and all dimmer control outputs will be disabled.
Refer to menu item “HARD-KEY” on page 18 of the user manual for detailed instructions on
how to enter a valid hard-key code. Be sure to record and le the valid hard-key code for future
reference.
Troubleshooting Reference
This manual is accurate at time of printing and subject
to revisions and technical updates as required without prior notice.
Please visit www.johnsonsystems.com for applicable updates.