Item Brochure

Volume/Cube Measurement Mode

1. Press the button two times until the Volume/Cube mode

icon ( ) displays near the top left of the LCD screen.

2. After selecting the desired unit of

measure and reference position, aim

the Laser Distance Meter so that the

laser dot is on the selected target to

measure the length (indicated by a “1”

in the figure to the right).

3. Keep your position stable and press the button. The length

measurement will appear above the main display.

4. Aim the Laser Distance Meter so that the laser dot is on the

selected target to measure the height.

5. Keep your position stable and press the button again. The length

and height measurements will appear above the main screen.

6. Aim the Laser Distance Meter so that the laser dot is on the

selected target to measure the width.

7. Keep your position stable and press the button again. The height

and width measurements will appear above the main screen, and

the calculated volume will appear on the main screen. The laser

will turn off.

8. Press the button again to take your next Volume measurement.

2955i_Manuals 6/4/18 10:37 AM Page 15