Item Brochure

Area/Square Measurement Mode

1. Press the button once until the Area/Square mode icon ( )

displays near the top left of the LCD screen.

2. After selecting the desired unit of

measure and reference position, aim

the Laser Distance Meter so that the

laser dot is on the selected target to

measure the length (indicated by a “1”

in the figure to the right).

3. Keep your position stable and press the button. The length

measurement will appear above the main display.

4. Aim the Laser Distance Meter so that the laser dot is on the

selected target to measure the width (indicated by a “2” in the

figure to the right).

5. Keep your position stable and press the button again. The length

and width measurements will appear on the secondary screen, and

the calculated area will appear on the main screen. The laser will

turn off.

6. Press the button again to take your next Area measurement.

2955i_Manuals 6/4/18 10:37 AM Page 14