Item Brochure

Volume Control

The Laser Distance Meter has three volume settings: high, low and

off. When the instrument is powered on, it will default to the most

recently used volume setting.

To change the volume setting, press and hold the button.

The unit will cycle through the three settings (S1 = high, S-2 = low,

Off = mute) until you release the button.

Measuring Modes

The Laser Distance Meter has 4 measuring modes. When the instrument

is powered on, it will default to the Length measuring mode.

1. Length (Single or Continuous)

2. Area/Square

3. Volume/Cube

4. 2-Point Pythagoras

To select a mode, press the button. When there is no measur-

ing mode icon shown near the top left of the LCD screen, the instru-

ment is in the Length measuring mode. The selected measuring mode

icon will display near the top left of the LCD screen for the Area,

Volume, and 2-Point Pythagoras measuring modes.

No icon will display when the

tool is in Length mode

Length Area/Square Volume/Cube 2-Point

(single or continuous) Pythagoras

2955i_Manuals 6/4/18 10:37 AM Page 10