Product Manual

10 ©2017 Johnson Level & Tool
To select the desired position, press the button. The laser indicator
icon at the top left of the LCD screen will display the selected position.
Single Length Measurement Mode
1. After selecting the desired unit of measure and reference
position, aim the Laser Distance Meter so that the laser dot is on
the selected target.
2. Keep your position stable and press the button.
3. The measurement will appear on the main display, and the laser
will turn off.
4. Press the button again to turn on the laser for your next
length measurement.
5. The latest measurement will display on the main LCD screen, while
the prior measurement will display above it on the secondary display.
Front of Unit Reference Position Back of Unit Reference Position
2162i-1_Manuals 8/21/17 1:56 PM Page 10