Product Manual

Calibrating

Operating Procedures Operation Display

1. Level the instrument accurately with the long vial.

2. Power on the instrument, the vertical angle and horizontal angle

are displayed after the telescope passes zero position.

3. Press the FUNC key once, and then press the V/% key.

4. Rotate the instrument and precisely aim at the clear and stable

target A as high as the instrument in the distance.

5. Press the 0-Set key once.

6. Turn the instrument and aim the right of the vertical plate at the

same target A.

7. Press the 0-Set key and the measured values are set. The

instrument goes back to the angle measurement mode, and the

calibration is finished.

Rotate the

telescope

Aim at the

plate left

position of A

Aim at the

plate right

position of A

• Send the instrument to an authorized repair facility for repairs after operations are repeated many times

without any effect.

8863H-English_Manuals 3/14/15 12:59 PM Page 31