Product Manual

Power On/Off

1. Press the power on/off button to power the laser on. The

power LED will light up and the laser will electronically self-

level itself, with rotation occurring once the unit is level at 600

rpms. The laser will automatically enter into the Tilt mode and the

Tilt LED will flash slowly for 30 seconds then become solid.

2. Press the power on/off button again to power off.

Low Battery Indication

If the power LED is flashing, the battery is low. To ensure normal

operation, replace alkaline batteries or charge the rechargeable

Ni-MH battery pack.

Alarm If Beyond Range

If the laser is inclined beyond the self-leveling range of ±5°, it will

deliver an audible alarm, and will not rotate. You will need to

re-position the laser until it is within the leveling range.

Tilt Mode Button

After turning on the laser, the laser will self-level and begin to

rotate. The Tilt mode LED will blink for 30 seconds after the

laser begins to rotate. During these 30 seconds if the laser is moved,

the laser will stop rotating, re-level and begin to rotate again. After 30

seconds, the Tilt mode LED will stop blinking and will become solid. If

the laser is moved when the Tilt mode LED is solid, the laser will stop

rotating. The laser beam will blink on and off and the Tilt mode LED

will blink quickly alerting the user the height of the laser may have

been changed. Pressing the tilt mode button on the laser keypad will

8488H-English_Manuals 11/11/14 2:36 PM Page 9