Product Manual

turn off the tilt mode and will allow the laser to re-level and start

rotating again. Press the tilt mode button again to enter tilt mode.

Vibrate V-W-S Button

Press the Vibrate V-W-S button and the Vibrate V-W-S LED

will turn on, which means the laser is in vibrate mode.

Vibrate mode allows continuous operation during high winds,

vibrations and shocks. Slight movements are ignored and the laser

only enters Tilt mode if significant movement occurs. Press the

Vibrate V-W-S button again to turn vibrate off.

8488H-English_Manuals 11/11/14 2:36 PM Page 10