Product Manual

6. Operating Instructions

IMPORTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

1. Power ON/OFF

2. Power LED

3. Decrease rotation

speed/rotate scan clockwise

4. Increase rotation speed/rotate scan counterclockwise

5. Scan mode LED

6. Scan mode key

1. Power ON/OFF: Press this key to turn on or turn off the laser.

rotary laser is on, power LED (2) is on (when

battery is low the power LED will blink)

OFF laser and power LED (2) is off

2. Scan mode key: Press this key to change the scan size

Fast Rotation: When the laser is turned on, the laser is in its fastest

rota

tion speed (scan mode LED (5) is on), laser is rotating.

Small scan: Laser is in small scan (scan mode LED (5) blinks).

Big scan: Laser is in big scan (scan mode LED (5) blinks).

Small scan

Big scan DOT

Fast rotation

2260H 6/4/09 11:42 AM Page 7