Product Manual

7. Using the Product

Horizontal and Vertical Line Projection

Turning the knob on the side of the unit will generate a simultaneous

vertical and horizontal line laser beam. To turn off, simply turn knob

counter-clockwise. If you have unlocked the knob on side of the unit

(as per previous page) then simply allow for the unit to level itself.

The unit can be manually rotated to the full 360º range.

Note: The laser level is able to compensate for angles of +/- 6º. If

the level is placed on an angle that is too sharp, it will not be able to

level itself accurately. The laser beam will flash if outside of its

leveling range.