Owner manual

3. Operation Guide

(a) Installation of battery

• Open the battery door

• Put the 9V battery into the battery-box. Please note the polarity.

Then close the battery door.

Note: Take the battery out if the instrument is not used for a long time.

(b) Turn on/off

• Press the power button. When Power symbol is

displayed, the instrument is ready for coarse

detection.

• When low battery symbol is displayed, change

the battery.

• Press the power button again to turn off the

instrument.

1. Adjusting bolt

2. Quick release button

3. Detector connecting screw

3708H_Manuals 7/20/10 11:27 AM Page 3