3589H-New_Manuals 7/8/10 9:38 AM Page 1 Self-Leveling Five-Beam Laser Dot Model No. 40-6680 Instruction Manual Congratulations on your choice of this Self-Leveling Five-Beam Laser Dot. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual for future use. This tool emits five laser beams, which projects a series of visible points on surfaces around the product (i.e. left, right, front, up, and down).
3589H-New_Manuals 7/8/10 9:38 AM Page 2 Table of Contents 1. Kit Contents 2. Features and Functions 3. Safety Instructions 4. Location/Content of Warning Labels 5. Location of Parts/Components 6. Operating Instructions 7. Using the Product 8. 9. 10. 11. 12. 13. 14. Self-Check & Fine Calibration Technical Specifications Application Demonstrations Care and Handling Product Warranty Warranty Registration Accessories 1.
589H-New_Manuals 7/8/10 9:38 AM Page 3 3. Safety Instructions Please read and understand all of the following instructions, prior to using this tool. Failure to do so, may void the warranty. DANGER! Class IIIa Laser Product Max. Power Output: ≤ 5mW Wavelength: 640-660nm THIS TOOL EMITS LASER RADIATION. DO NOT STARE INTO BEAM. AVOID DIRECT EYE EXPOSURE. ATTENTION IMPORTANT • Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
3589H-New_Manuals 7/8/10 9:38 AM Page 4 4. Location/Content of Warning Labels 4 ©2010 Johnson Level & Tool - Rev.
3589H-New_Manuals 7/8/10 9:39 AM Page 5 5. Location of Part/Components Laser Output Window Battery Door On/Off Switch Laser Output Window Power Indicator Lamp 1/4" – 20 thread 1/4”– 20 Thread attaches laser to base Position tab on base into groove on laser Rare Earth Magnets Bumpers for setting base against metal track ©2010 Johnson Level & Tool - Rev.
3589H-New_Manuals 7/8/10 9:39 AM Page 6 6. Operating Instructions IMPORTANT: It is the responsibility of the user to verify the calibration of the instrument before each use. Battery Installation Note: Always check to be sure that the on/off switch is in the off position before removing and replacing batteries. 1. As shown in fig. 3, remove battery cover. 2. Put three “AA” alkaline batteries into the battery compartment noting polarity (as shown).
3589H-New_Manuals 7/8/10 9:39 AM Page 7 7. Using the Product This laser level was designed for various mounting applications. 1. Position laser base so laser beam shoots between the feet of the base for plumb applications. 2. Base top being rotated to shoot the laser beam down the back of the base. 3. Position base by rotating top to shoot beam down the back of the base. Ideal for use with metal track. 4. Rare earth magnets located on base allows the base to attach to metal surfaces.
3589H-New_Manuals 7/8/10 9:39 AM Page 8 8. Self-Check & Fine Calibration IMPORTANT: It is the responsibility of the user to verify the calibration of the instrument before each use. Self-Check Calibration 1. With the laser on its base and set on a flat platform inside a room, turn the laser on. 2. Mark the down beam location and use this as your reference point. 3. Locate the up beam and mark its point as position A. 4.
3589H-New_Manuals 7/8/10 9:39 AM Page 9 Fine Calibration 1. Remove plastic screws on front and left of the laser. 2. With the unit on its base on a flat platform, turn the laser on. 3. Return the laser back to its original starting point when self-checking the laser. 4. Use a 2mm allen wrench to turn the front adjusting screw to position the laser beam forward and backward. 5. Use the side adjusting screw to position the laser beam left and right. 6.
3589H-New_Manuals 7/8/10 9:39 AM Page 10 Self-Checking the 3 Horizontal Beams 1. As shown in Fig. 9.1, set up the instrument on the tripod or flat platform 50 ft. (9.1m) from an upright wall. Aim the front beam at the face of the wall. Mark the point projected on the wall by front beam as A. 2. Turn the instrument Fig. 9.3 Fig. 9.1 Fig. 9.2 clockwise (Fig. 9.2) to make the point projected by right laser beam on the same exact line as point A, and then mark the point as B. 3.
3589H-New_Manuals 7/8/10 9:39 AM Page 11 9. Technical Specifications Laser Wavelength 650nm±10 Laser Classification Class IIIa Maximum Power Output ≤5mW Accuracy ±1/8"/50 ft. (±2mm/10m) Interior Range Up to 200 ft. (60m) depending upon light conditions Self-Leveling Range ±4.5° Power Supply 3 “AA” alkaline batteries (included) Dimensions 3.150" x 3.858" x 4.000" (80 x 98 x 101.6mm) Weight 1.101 lbs. (0.
3589H-New_Manuals 7/8/10 9:39 AM Page 12 10. Application Demonstrations Plumb reference for lamp installation Reference for fence installation Reference for pipeline installation Reference for dormer installation Reference for door frame installation Reference for baseboard installation Reference for vertical partition 12 Reference for constructing cubic partition ©2010 Johnson Level & Tool - Rev.
3589H-New_Manuals 7/8/10 9:39 AM Page 13 11. Care and Handling • This laser unit is a precision tool that must be handled with care. • Avoid exposing unit to shock vibrations and extreme temperatures. • Before moving or transporting the unit, make sure that the unit is turned off. • Remove the batteries when storing the unit for an extended time (more than three months) to avoid damage to the unit should the batteries deteriorate. • Always store the unit in its case when not in use.
3589H-New_Manuals 7/8/10 9:39 AM Page 14 NOTE: The user is responsible for the proper use and care of the product. It is the responsibility of the user to verify the calibration of the instrument before each use. For further assistance, or if you experience problems with this product that are not addressed in this instruction manual, please contact our Customer Service Dept. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS.
3589H-New_Manuals 7/8/10 9:39 AM Page 15 14. Accessories Johnson® accessories are available for purchase through authorized Johnson® dealers. Use of non-Johnson® accessories will void any applicable limited warranty and there will be NO WARRANTY. If you need any assistance in locating any accessories, please contact our Customer Service Department. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS.
3589H-New_Manuals 7/8/10 9:39 AM Page 16 16 ©2010 Johnson Level & Tool - Rev.