Owner's manual

2. Fine detection

1. power symbol

2. fine detection symbol

• Press the coarse/fine detection button.

The detector is ready for fine detection.

• Move the instrument up and down

like the coarse detection procedure.

• When the instrument displays as shown in

the figure, it is level with the laser beam.

• Tighten the clamp bolt and mark the

position of the object on the rabbet.

(e) Sound function

• Press the horn button. The horn symbol is displayed and it is ready

for the sound function. The detector will then conduct up/down

detection through horn signals.

• When the sound signal is a longer beep, move the instrument up.

• When the instrument makes short beep, move it down.

• When the instrument makes a continuous sound, it is level with

the laser beam.

• If there is no sound heard, the instrument has not received the

laser rotational signal.

(f) Turn-off timer

• The detector will automatically turn off if it has not received a laser

signal for 5 minutes

(g) Back light system

• There is a back light at the right side of the display window. Press

the back light button which will illuminate the display window.