User guide

3. Operation Guide

(a) Installation of battery

• Open the battery-box cap and connect the cable inside with the

two polarities of the 9V battery.

Note: Take the battery out if the detector if not used for a long time.

• Put the 9V battery into the battery box and close the battery-box cap.

(b) Turn on/off

• Press the on/off button. When Power symbol is

displayed, the detector is ready for coarse

detection.

• When low battery symbol is displayed, change

the battery.

• Press the on/off button again to turn off the

detector.

c) Using the clamp holder

1. clamp bolt

2. screw

• Position the detector on the clamp

holder using the screw of the clamp

holder.

• Position the clamp holder on rod

using the clamp bolt of the clamp

holder.

3515H-All_Manuals 6/2/10 10:16 AM Page 12