Owner's manual

6 ©2013 Johnson Level & Tool - Rev. 2
6. Using the Remote Control/Receiver
Remote Display
1. Power Button (POW)
a. Hold for one second to power up Sensor/Slaver with beep.
b. Hold for two seconds to turn off Remote Control/Receiver
with beep.
2. Measure Button (MEAS)
a. Push button to enable measuring and lock control pad
with beep and visual LED is lit.
b. Push button again to disable measuring and unlock control
pad with beep and visual LED is off.
6657H-English_Manuals 1/28/13 1:45 PM Page 6