7349H-English_Manuals 9/6/13 1:55 PM Page 1 Laser Distance Measure Model No. 40-6006 Instruction Manual Congratulations on your choice of this Laser Distance Measure. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manual for future use. This is a Class II laser tool and is manufactured to comply with CRF 21, parts 1040.10 and 1040.11 as well as international safety rule IEC 285.
7349H-English_Manuals 9/6/13 1:55 PM Page 2 Table of Contents 1.Kit Contents . . . . . . . . . pg. 2 2.Safety Information . . . pg. 2-3 3.Location/Content of Warning Labels . . . . . . . pg. 3 4.Location of Parts/ Components . . . . . . . pg. 4-6 5.Start Up - Battery Installation Instructions . . . . . . . . . . pg. 7 6.Using the Product . . pg. 8-16 7.Technical Specifications pg. 17 8.Product Warranty. . . . . pg. 18 9.Product Registration . . pg. 19 1.
7349H-English_Manuals 9/6/13 1:55 PM Page 3 ATTENTION IMPORTANT • Read all instructions prior to operating this laser tool. Do not remove any labels from tool. • Do not stare directly at the laser beam. • Do not project the laser beam directly into the eyes of others. • Do not set up laser tool at eye level or operate the tool near a reflective surface as the laser beam could be projected into your eyes or into the eyes of others.
7349H-English_Manuals 9/6/13 1:55 PM Page 4 4. Location of Part/Components 1 5 2 3 4 6 7 1. LCD Display 2. Power On/Measure/ Continuous Measure Button 3. Function Button Add Subtract Area Volume Indirect/Pythagoras 4 4. 5. 6. 7. 8. 8 Clear/Power Off Button Warning Label Battery Cover Laser Emitting Window Receiver Window ©2013 Johnson Level & Tool - Rev.
7349H-English_Manuals 9/6/13 1:55 PM Page 5 LCD Display 5 6 7 8 9 1 2 3 4 1. 2. 3. 4. 5. Active Laser Indicator Measurement Reference Position Sub-Screen Main Screen Battery Status ©2013 Johnson Level & Tool - Rev. 1 6. 7. 8. 9.
7349H-English_Manuals 9/6/13 1:55 PM Page 6 Measuring Reference Range Range is specified between a minimum 2-inches to a maximum of 100-feet with an accuracy of 1/16". Target Surfaces Measuring errors may occur when aiming at surfaces composed of colorless liquids (e.g. water), glass, Styrofoam or similar semipermeable surfaces. Aiming at high gloss surfaces may deflect the laser beam and lead to measurement errors.
349H-English_Manuals 9/6/13 1:55 PM Page 7 5. Start Up - Battery Installation 1. 2. 3. 4. Remove battery compartment cover. Insert 2-“AAA” batteries observing correct polarity. Close battery compartment cover. Battery status will be shown in start up screen. Battery has 100% power Battery has about 60% power Battery has about 25% power Battery has 5% power and a new batteries are required. Note Use only alkaline batteries.
7349H-English_Manuals 9/6/13 1:55 PM Page 8 6. Using the Product Settings The 40-6006 has two menu settings: 1. Units of Measure 2. Measurement Reference Position To enter menu settings: With the unit turned OFF, press and release the simultaneously. + buttons Units of Measure LCD will display UNIT – there are seven units of measure 1.
7349H-English_Manuals 9/6/13 1:55 PM Page 9 3. Press the button to switch from the front of the unit to the rear of the unit. 4. To exit, press the button to begin operations Single Distance Measuring 1. Press the measure button to turn on the unit. 2. Point the laser beam to the target. 3. While holding the unit steady, press the measure button again to make the measurement. 4. Unit will beep once, measurement will be displayed on the main screen and the laser beam will turn off. 5.
7349H-English_Manuals 9/6/13 1:55 PM Page 10 Continuous Measuring 1. After the unit is powered on, hold the button in for 2 seconds, the LCD display will change from single ( ) to continuous ( ) display. 2. This mode will take continuous measurements as you move closer or farther away from the target. 3. Minimum working range is 2", maximum working range is 100’. 4. Press the button once to hold the continuous measuring mode. Press to resume continuous measuring mode. 5.
7349H-English_Manuals 9/6/13 1:55 PM Page 11 Subtracting Measurements 1. To subtract additional measurements after taking the first measurement, press the function button twice. 2. The first measurement will move to the sub-screen and the laser beam will be on. The subtract sign (–) by the main screen will be flashing. 3. Point the laser beam to the next target and press the button. 4.
7349H-English_Manuals 9/6/13 1:55 PM Page 12 Area Measurement (Square2) 1. With unit turned on, hold down the button until the area symbol ( ) is displayed. 2. Press the button once to measure the width. The bottom area symbol line will be flashing. 3. Press the button a second time to measure the length. The right side area symbol line will be flashing. 4. The area will be displayed on the main screen in square feet. Area symbol will be flashing. Volume Measurement (Cube3) 1.
7349H-English_Manuals 9/6/13 1:55 PM Page 13 Indirect (Pythagorean Theorem) 1 With the unit turned on, hold the button until the indirect symbol, triangle icon ( ) is displayed. 2. The calculation is based on Pythagorean Theorem a2 + b2 = c2. 3. Follow the order of the flashing lines. Note: For accurate measurements the instrument’s position must be held constant. For example, note the position of your hand when taking first measurement. Do not move your hand when preparing to take the second measurement.
7349H-English_Manuals 9/6/13 1:55 PM Page 14 Indoor & Outdoor Measurements This model is designed to take measurements indoors and outdoors under normal settings. The measuring surfaces and ambient light are critical factors to the quality of measurement (indoors and outdoors). Outdoor measurement capability may be limited due to sunlight/UV ray interference.
7349H-English_Manuals 9/6/13 1:55 PM Page 15 Measurement Errors Error messages will appear if the unit’s receiver is not getting a sufficient laser return signal.
7349H-English_Manuals 9/6/13 1:55 PM Page 16 Tips from the Pro’s Take more than one measurement in critical situations where accuracy needs to be greater than an estimation measurement. Take three to four measurements from the same position to compare consistency of each reading. Prior to important measurements verify that the instrument is in proper working order and take sample measurements to a known distance to verify accuracy.
7349H-English_Manuals 9/6/13 1:55 PM Page 17 7. Technical Specifications Measure Range* 2" - 100’ Accuracy* ± 1/16" Measure Speed* 0.5 seconds Laser Type 660nm, ± 10nm, Class II, ≤ 1mW Power Supply 2 - “AAA” Alkaline Batteries (included) Battery Life Up to 10,000 measurements Dimensions Working Temperature 4.33" x 1.77" x 1.
7349H-English_Manuals 9/6/13 1:55 PM Page 18 8. Product Warranty Johnson Level & Tool offers a two year limited warranty on our laser distance measure products. You can obtain a copy of the limited warranty for a Johnson Level & Tool product by contacting Johnson Level & Tool's Customer Service Department as provided below or by visiting us online at www.johnsonlevel.com. The limited warranty for each product contains various limitations and exclusions.
7349H-English_Manuals 9/6/13 1:55 PM Page 19 9. Product Registration Enclosed with this instruction manual you will find a warranty registration card to be completed for your product. You will need to locate the serial number for your product that is located inside the battery compartment door.
7349H-English_Manuals 9/6/13 1:55 PM Page 20 20 ©2013 Johnson Level & Tool - Rev.
