User's Manual

MXR20_XUR_XIR_XER_Console_OM_r1_0_A.indd 6-7
10/2/20 1:32 PM
BLUETOOTH
The console can connect via Bluetooth to one device per category:
• Speakers / Headphones
• Heart Rate Monitors
GETTING STARTED
1) Check to make sure no objects are nearby that will hinder the movement of the
equipment.
2) Plug in the power cord and turn the equipment ON (Note: Some equipment
does not have a power switch).
TREADMILLS ONLY:
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making sure that it is secure
and will not become detached during operation.
5) Insert the safety key into the safety keyhole.
WORKOUT SETUP
6) Touch GO to begin a manual workout. Time, distance, and calories will all
count up from zero. OR...
7) Select an optionfrom theFEATURED, TRAINING, RECENT orAPPS screens.
• Use to adjust your workout settings.
• Touch to open a keypad to enter numbers.
• Touch toadd a workout to your FAVORITESonthe FEATUREEXERCISES
screen.
8) Touch STARTWORKOUT to begin your workout.
FINISHINGYOUR WORKOUT
When your workout is complete, your workout results will continue to display on
the console for 2 minutes and is automatically saved to your RECENT workouts and
ViaFit, if xID Terms and Conditions were accepted, and you are logged in.
HOME SCREEN
• Touch to change WORKOUT FEEDBACK displays at the bottom of the screen.
• While using anapp, touch to go back to the home screen.
• Touch toadjust VOLUME,pair aBLUETOOTH device or tochange AUDIO
SOURCE (Netflix, My Media, Virtual Active, etc.).
• Touch to increase or decrease the resistance level, speed or incline.
• Touch to use the keypad to set resistance level, speed or incline. Press to
confirm change.
• Touch to change resistance level, speed or incline back to previous setting.
• Touch to temporarily pause your workout and touch to resume. While
paused, touch to end workout.
• Touch to increase or decrease the duration of your workout.
• Touch to enter cool down mode. Cool down lasts for five minutes while
reducing the workout intensity, allowing your body to recover from your workout.
• Touch to lock the screen. Touch it again to unlock the screen and allow screen
touches.
TO CONNECT YOUR COMPATIBLE DEVICE:
1) DEVICE PAIRING can be accessed from the SETTINGS MENU .
2) Enable Bluetooth on your device and make sure it is discoverable.
3) Touch the appropriate category from the list. The Bluetooth device should
appear to the right after a few seconds.
4) Touch the device name and follow the on-screen prompts to pair the device.
Once paired, or will be highlighted and appear in the top right corner
of the message bar.
* Not all Bluetooth protocols are compatible.
USB AUDIO/VIDEO
The console can stream media in the MY MEDIA APP via USB. Supported devices
include USB flash drives (up to 16 GB), Windows phones/tablets, and Android
phones/tablets.
The media types supported are:
• Audio – AAC, 3GP, MP4, M4A, AAC, MP3 and WAV
• Video – H.263 (3GP, MP4) and H.264 (MP4, MOV)
TO PLAY MEDIA DURING YOUR WORKOUT:
1) Unlock and connect your device to the USB port located beneaththe
display.
2) Open the MY MEDIA app and select the USB device name from the Media
Source list.
3) Select the Audio or Video tab at the top to access your files and play
your media.
AUDIO IN/OUT
You can play audio through the console speakers by connecting a device to the
audio in jack located beneath the display. Plug your headphones into the audio
out jack to use them instead of the console speakers.
6 7
ENGLISH
ENGLISH