User's Manual

DRAFT - DO NOT PRINT

GENERAL

TROUBLESHOOTING

Our Suspension Elliptical Trainers are designed to be reliable and easy to use. If,

however, you have a problem, these troubleshooting steps may reveal the cause.

PROBLEM: The console does not light up.

SOLUTION: Check to make sure the power switch located on the backside of the

console is turned on.

SOLUTION: Make sure the power cord is plugged into the base of the Suspension

Elliptical Trainer, and the power switch located near the plug is on.

SOLUTION: Make sure the wire harness is plugged into the back of the console.

PROBLEM: You feel a thump or hitch in the stride motion.

SOLUTION: Check assembly and tightness of all hardware.

SOLUTION: Check the bolts and the bracket under the footplate.

NOTE: If the above steps fail to remedy the problem, discontinue use, turn the

power off and contact your retailer.