User's Manual

28
DRAFT - DO NOT PRINT
S7200HRT ENGINEERING MODE
Engineering consists of optional settings and information used by service technicians
to assure your product is working in proper order. There are also several default
settings that allow you to customize the Suspension Elliptical Trainer to fit your needs.
ENTERING AND USING ENGINEERING MODE
• Press and hold the UP s and DOWN t RESISTANCE ARROW keys
simultaneously for three seconds.
• The console will beep and bring you into engineering mode. Use the UP
s and
DOWN t RESISTANCE ARROW keys to scroll through the various engineering
options.
• Press the ENTER key to select the appropriate engineering option.
• Use the UP
s and DOWN t RESISTANCE ARROW keys within each setting to
modify the setting
• Press and hold the ENTER key to save the setting.
• To exit engineering mode, press and hold the START key for three seconds.
ENGINEERING OPTIONS INCLUDE:
HARDWARE TEST
LED TEST
DEF TIME SET
DEF LEVEL SET
DEF AGE SET
DEF WEIGHT
BEEPER MODE
SPEED MODE
MACHINE MODE
DOT DISP MODE
ACC TIME
ACC DIST
INCLINE TEST
AUTO-CALIBRATE
INCLINE RESET
SAFETY MODE
SETTING
TEST USED BY SERVICE TECHNICIANS TO TEST ECB SYSTEM
TEST USED BY SERVICE TECHNICIANS TO TEST LED DISPLAY
SET THE DEFAULT WORKOUT TIME
SET THE DEFAULT RESISTANCE LEVEL
SET THE DEFAULT USER AGE
SET THE DEFAULT USER WEIGHT
TURN THE BEEPER ON OR OFF
SET THE FEEDBACK INFO TO ENGLISH (MILES) OR METRIC (KILOMETERS)
SET TO BIKE OR ELLIPTICAL TRAINER
SET DOT MATRIX DISPLAY WHEN NOT IN USE
MEASURES TOTAL TIME IN HOURS OF USE
MEASURES TOTAL DISTANCE TRAVELED ON THE UNIT
TESTS AT ZERO, MIN., AND MAX.
AUTO-CALIBRATION OF ELEVATION MOTOR TO SET MIN, MAX AND ZERO POSITIONS
ALLOWS YOU TO TURN ON OR OFF THE INCLINE RESET AT THE END OF THE WORKOUT
ALLOWS YOU TO SET UNIT SO RESISTANCE IS FULLY ENGAGED WHEN NOT IN USE
DESCRIPTION
CONSOLE