User's Manual

ASSEMBLY STEP 3
A Open WHITE HARDWARE BAG.
B Assemble the LEFT AND RIGHT
BRACKETS (20 AND 21) to the CONSOLE
BASE using SOCKET HEAD CAP SCREWS
(12), FLAT WASHERS (14) and SOCKET
HEAD CAP SCREWS (11).
Assembly tip: It is much easier to accomplish
this task if the console base is left inside it’s
shipping container.
11
SOCKET HEAD CAP SCREW
Qty: 2
12
SOCKET HEAD CAP SCREW
Qty: 4
14
FLAT WASHER
Qty: 6
WHITE HARDWARE BAG CONTENTS :
ASSEMBLY STEP 4
A Open BLUE HARDWARE BAG.
B Slide the URETHANE ARMS over the steel
tubes on the CONSOLE BASE.
C Fasten the URETHANE ARMS to the steel
tubes using SOCKET HEAD CAP SCREWS
(17) and SPACERS (19).
17
SOCKET HEAD CAP SCREW
Qty: 2
19
SPACER
Qty: 2
BLUE HARDWARE BAG CONTENTS :
14
21
12
20
11
19
17
1514
MX15_T5x_T7xe_T7xi_OM_Rev2_2_DES.indd 14-15 2/2/15 9:58 AM