User's Manual

ASSEMBLY STEP 2ASSEMBLY STEP 1
A Open BLACK HARDWARE BAG.
B Assemble both the LEFT AND RIGHT
CONSOLE MASTS
to the TREADMILL BASE
using item SOCKET HEAD CAP SCREWS (10)
and FLAT WASHERS (14).
10
SOCKET HEAD CAP SCREW (M8 x 20mm)
Qty: 10
14
FLAT WASHER (6.2 x 12 x 1.6)
Qty: 10
BLACK HARDWARE BAG CONTENTS :
A Remove the MOTOR COVER and set aside.The
MOTOR COVER need to be removed to gain
access to the motor compartment so that the wire
harness connections can occur.
10
14
1312
MX15_T5x_T7xe_T7xi_OM_Rev2_2_DES.indd 12-13 2/2/15 9:57 AM