User's Manual

• All video and power outlets must be functional the day of delivery / assembly of the product. The client is

responsible for any additional installation charges associated with return visits.

• Electrical supply may fluctuate in your area. To ensure stable performance of the product, use the proper gauge

wire.

WARNING:

Failure to follow these specifications can cause damage to your product and

can void the warranty.

Connect this exercise product to a properly grounded outlet only.

Never operate product with a damaged cord or plug even if it is working properly. Never operate any product if it

appears damaged, or has been immersed in water. Contact Customer Tech Support for replacement or repair.

WARNING

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not

modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified

electrician.

TREADMILL ASSEMBLY

There are several areas during the assembly process that special attention must be

paid. It is very important to follow the assembly instructions correctly and to make sure

all parts are firmly tightened. If the assembly instructions are not followed correctly, the

treadmill could have parts that are not tightened and will seem loose and may cause

irritating noises. To prevent damage to the treadmill, the assembly instructions must

be reviewed and corrective actions should be taken.

Before proceeding, find the treadmill frame serial number located on a barcode

sticker near the on/off power switch and power cord and enter it in the space

provided below. The console serial number is located on a barcode sticker on the

back of the console near the bottom center.

ENTER YOUR SERIAL NUMBERS AND MODEL NAME IN THE BOXES BELOW:

» Use the information above for initial setup and when calling for service.

WARNING

FRAME SERIAL NUMBER LOCATION

FRAME SERIAL NUMBER:

CONSOLE SERIAL NUMBER:

MODEL NAME:

MATRIX

CONSOLE SERIAL NUMBER LOCATION

MX15_T5x_T7xe_T7xi_OM_Rev2_2_DES.indd 8-9 2/2/15 9:57 AM