User's Manual

1514
6
Z41
Z34
CONSOLE SCREW
S5X, S7XE & S7XI ASSEMBLY STEP 4
S5X, S7XE AND S7XI MODELS ONLY.
A Open BLUE HARDWARE BAG.
B Carefully pull the CONSOLE CABLE through
the CONSOLE MAST using the twist tie
located inside the CONSOLE MAST.
C Attach CONSOLE MAST to MAIN FRAME
using PRE-INSTALLED BOLTS AND
WASHERS.
D Slide WAVY WASHER (L) over CRANK
followed by PEDAL ARM as shown. Rest
PEDAL ARM WHEEL on GUIDE RAIL.
E Attach the PEDAL ARM to the CRANK using
1 FLAT WASHER (K), 1 SPRING WASHER
(B) and 1 BOLT (M).
F Repeat steps D–E on the opposite side of the
stepper.
Z34 SOCKET HEAD BOLT(M8x25L) Qty: 2
BLUE HARDWARE BAG CONTENTS :
ASSEMBLY STEP 3
A Open ORANGE, YELLOW AND GREEN
HARDWARE BAGS.
B Attach the GUIDE RAIL SET to the MAIN
FRAME using 4 BOLTS (F), 4 SPRING
WASHERS (E) and 4 FLAT WASHERS (D).
C Attach the GUIDE RAIL SET to the INCLINE
BRACKET using 4 BOLTS (G), 4 FLAT
WASHERS (H), 4 SPRING WASHERS (I) and
4 NUTS (J).
D S3X MODELS: Skip page 23 and continue on
page 24.
6
Z04 x 3
Z05 x 3
Z03
Z06
Z05 x 4
Z03
Z06
Z05
Z06
Z06
Z10
Z02
Z06 ARC WASHER 8
Z03
Z05 BUTTON HEAD BOLT
(M8x16L)
2
4
SCREW SET Z10 BUTTON HEAD BOLT
(M8x45L)
2
Z02 LOCK WASHER 3
Z04
Z05 BUTTON HEAD BOLT
(M8x16L)
3
3
LOCK WASHER
ORANGE HARDWARE BAG:
S5x / S7xe / S7xi ASSEMBLY COMPLETE!
7XE (SHOWN) / 7XI, 5X CONSOLE ASSEMBLY
YELLOW HARDWARE BAG:
GREEN HARDWARE BAG:
MX15_S3x_5x_7xe_7xi_OM_Rev1_7_DES.indd 14-15 1/30/15 4:14 PM