User's Manual

2726
Never operate product if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or
immersed in water. Contact Customer Tech Support for examination and repair.
POWER
If your unit is powered by a power supply, the power must be plugged into the power jack, which is located in the front
of the machine near the stabilizer tube. Some units have a power switch, located next to the power jack. Make sure it
is in the ON position. Unplug cord when not in use.
WARNING
PROPER USAGE
Your unit offers a variety of foot positions. Moving
your foot to the forward most position of the foot pad
increases your step height, which will create a feel
similar to a step machine. Placing your foot toward the
back of the foot pad decreases your step height and
creates more of a gliding feel, similar to a smooth walk
or run. Always make sure your entire foot is secured
on the foot pad. The pedal motion is dependent.
To determine proper workout position, stand on the
pedal with your foot on the center of the pedal. Keep
your knees slightly bent at all times.
MOUNTING THE STEPPER
1) Stand behind the unit.
2) While holding both of the rear arm handles, place one foot on the corresponding footpad. Wait until the footpad
comes to a stop at the bottom of the stroke.
3) Then place your other foot on the opposite pedal.
MX15_S3x_5x_7xe_7xi_OM_Rev1_7_DES.indd 26-27 1/30/15 4:14 PM