User's Manual

2322
CARE AND MAINTENANCE
HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your stepper and its operating
environment will keep maintenance problems and service calls to a minimum. For this reason, Customer Tech Support
recommends that the following preventive maintenance schedule be followed.
DAILY
• Unplug the unit. Clean entire machine using water and a mild soap or other Matrix approved solution (cleaning agents
should be alcohol and ammonia free).
QUARTERLY
• Check all connecting joint areas for tightness of bolt assemblies.
• For 7xe consoles, enter service mode and select ‘test’. Select ‘touch calibration’ and then select ‘start’. Follow the on-
screen prompts and touch the screen where indicated.
CONSOLE RESPONSIVENESS ISSUES (CONSOLE REBOOT):
FOR 7XE CONSOLES
Press and HOLD the Channel Up and Channel Down Button until you hear a Beep. Your console will reset.
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
A Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the stepper. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia based cleaner or alcohol. This will cause discoloring of the
aluminum and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This could cause electrocution.
D Wipe the console, heart rate grip, handles, foot pads and handlebars after each use.
For cleaning 7xe and 7xi displays, use distilled water in an atomizer spray bottle. Spray distilled water onto soft, clean,
dry cloth and wipe display until clean and dry. For very dirty displays, adding vinegar is recommended.
CAUTION: Be sure to have proper assistance to install and move the unit in order to avoid injury or damage.
CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by
Matrix Fitness.
MAINTAIN LABELS AND NAMEPLATES.
Do not remove labels for any reason. They contain important information. If unreadable or missing, contact Matrix
Fitness Systems for a replacement. 1-866-693-4863, www.matrixfitness.com
MAINTAIN ALL EQUIPMENT
Preventative maintenance is the key to smooth operating equipment, as well as keeping the user’s liability to a
minimum. Maintain a clean area around the equipment, free from dust and dirt. Equipment needs to be inspected at
regular intervals. Defective components must be replaced immediately. Improperly working equipment must be kept out
of use until it is repaired. Ensure that any person(s) making adjustments or performing maintenance or repair of any
kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance training at our corporate facility
upon request or in the field if proper arrangements are made.
MX15_S3x_5x_7xe_7xi_OM_Rev1_7_DES.indd 22-23 1/30/15 4:14 PM