Parts List

1-3/4" (45mm) & 2-1/4" (57mm) DOOR REQUIRES A 2 X 12 STUD WALL
3/4"
[19mm]
DOOR HEIGHT
PLUS 4" [102mm]
1-1/2"
[38mm]
1-1/2"
[38mm]
3-1/2"
[89mm]
3/4"
[19mm]
8-1/4" [210mm]
11-1/4" [286mm]
FRONT EDGE OF DOOR
DOOR
BOTTOM
5/16"
[8mm]
1-3/4"
(45mm)
DOOR
1/4" [6.4mm] WHEN USING 1-3/4" [45mm] DOORS
3/4" [19mm] WHEN USING 2-1/4" [57mm] DOORS
3 X DOOR WIDTH (minus) 1-3/4" [45mm]
4 X DOOR WIDTH +1/8" [3.2mm]
DOOR WIDTH +7/8" [22mm]
11-1/4"
[286mm]
2054 MULTI-DOOR PULL CATCH
3/4" FINISH JAMB (PLUS) SHIM = 1"
ROUGH JAMB
ROUGH JAMB
3/16" (5mm)
1-1/4" (32mm)
1-1/4" (32mm)
3/16" (4.8mm)
4" (102mm)
2 X 4 2 X 4
2 X 4 2 X 4
200MP Commercial Grade Multi-Pass Pocket Door Hardware
for 1¾” or 2¼” Doors to 400 lbs./each
200MP
ORDERING DATA
An extra heavy duty multi-pass commercial pocket door hardware set. Similar to the 200BP, but with enough
hardware to carry three doors. This can carry heavy duty solid core doors up to 400 lbs each. No bottom track
required. It utilizes trackless guide posts allowing the doors guide each other. The tracks are precision extruded heavy
gauge aluminum I-beam track that will not allow the wheels to “jump” the track. It utilizes fully adjustable/removable
door hangers for precision t and nish. The wheels themselves have smooth rolling nylon exteriors with individually
caged ball-bearings around the axle. This is quite simply our best line of hardware that we make.
For converging doors, 3 doors going right and 3 doors going left, meeting in the middle, just order two hardware sets.
One for each side.
Item No. Max Door Size Lbs./Case
20MP0962 Three 2’0” Doors 1¾” Thick Bulk Only
20MP0963 Three 2’0” Doors 2¼” Thick 5/Carton
20MP1202 Three 2’6” Doors 1¾” Thick Bulk Only
20MP1203 Three 2’6” Doors 2¼” Thick 5/Carton
20MP1442 Three 3’0” Doors 1¾” Thick Bulk Only
20MP1443 Three 3’0” Doors 2¼” Thick 5/Carton
20MP1922 Three 4’0” Doors 1¾” Thick Bulk Only
20MP1923 Three 4’0” Doors 2¼” Thick 5/Carton
8
17
100PD Commercial Grade Pocket Door Hardware
for a 1” or Thicker Door to 125 lbs. (200 lbs. with 1125 Hangers)
ORDERING DATA
DOOR HEIGHT + 2-3/4"
(
70mm
)
3/4" (19mm)
(5mm)
3/16"
100PD
100PD
Item No. Max Door Size Lbs./Case
100481DR One 2’0” Door 12/5
100601DR One 2’6” Door 14/5
100721DR One 3’0” Door 16/5
100961DR One 4’0” Door 20/5
Qty Part #
1 100 Track
2 1120 Hangers
1 1550 Guides
1 1513 Bumper
1 1712 Wrench
100PD Components
Can be used for pocket doors or
in combination with itself to make
special installations of sliding doors.
Aluminum track with convex rails,
jump proof three wheel (1” dia.)
hangers assure a smooth, quiet
operation. Brass-tone steel parts.
Tracks can be cut down for smaller
applications.
Optional Hanger #1125 available for
doors up to 200 lbs.
100PD Hardware Set
Compatible