Parts List

Panel Displays USING JOHNSON 100 SERIES TRACK AND HARDWARE
Valet Rod
Qty Part #
1 100-0072
2 1125 Hangers
2 10 Guide
1 1712 Wrench
2 1155 Stops
NO MORE WRESTLING WITH LOOSE PANELS OR DOORS!
Display your doors with easy-to-construct sliding “show walls”. These
displays take up less oor space than the old methods of stacking or
leaning doors.
The Door Panel Display uses the same track and hanger system as
the Johnson 1500 Pocket Door Frame and can handle 3’0” doors up
to 200 lbs..
Item No. Length Pkg/Qty Wt/Ctn
100721DD 72” 25/Ctn 75 lbs.
) A real clothing organizer. Hangers are separated eliminating “hanger overlap”. Ward-
robes stay neat and orderly. Clothing stays fresh and unwrinkled. Deep drawn hanger
slot in the gold enameled steel Valet/rod will not scratch hangers, provide strength to
rod as well as the shelf above. Available bulk only in 96” (2438mm) lengths.
Can be easily cut for smaller shelves. Use short lengths near washers for drip dry or
wrinkle free.
Item No. Lbs./Case
9500-096 32/20(Bulk Only)
2041 Hidden Guide
The 2041 Hidden Pocket Door Guide Kit permits pocket door guiding
without the use of standard 1550 visible pocket door guides. The heavy
duty steel reinforced guide post is fastened to the center of the Split Stud
Floor Plate just inside the pocket and rides inside a groove routed in the
bottom edge of the door out of view for a clean look. 2 guide posts are
included in the kit, one for sub oor and one for nished oor applications..
The 2041PLBG works with all Johnson Pocket Door Frames except
2710/2711.
© 2016 L.E. Johnson Products Inc.
2083
2040
2084
2041PLBG Part Set Contents
1 - 2083 Finished Floor Guide Post
1 - 2084 Sub-Floor Guide Post
1 - 2040 Guide Groove Cover Plate
Hardware Mounting Screws
Pocket Door Hardware
R
2041PLBG
Hidden Pocket Door Guide Kit
2041 Kit Includes 2 Guide Posts:
Use the 2083 Finished Floor Guide Post when
mounting Split Stud Floor Bracket to finished floor surface.
Use the 2084 Sub-Floor Guide Post when mounting Split Stud
Floor Bracket to Sub-Floor surface. 2084 assumes that finished
floor material will be 3/4” (19mm) thick.
Step 1. Step 2. Step 3. Step 4.
Item No. Lbs./Case Qty
2041PLBG 1.7/10
8
22