0 nso INSTRUCTIONS —% 21 PULL/ 134 PULL o ohnsorharduere com INSTRUCTION SHEET USE 21 PULL WITH (35mm) DOORS \ USE 134 PULL WITH (45mm) DOORS 1) MARK THE DOOR as shown (or in a location (54mm) DIA. that fits door style if other than ques door). Carefully bore (54mm) Dia. hole thru door. Boring from both sides will prevent splintering of door skin. Hole must be in alignment, however. [ 36" (91cm) — (60mm) r—— 2) INSERT PULL {with spacers attached) thru one side of door.
