°0 10 INSTRUCTIONS POCKET DOOR PRIVACY LOCK www.johnsonhardware.com 1521 series for (35mm) THICK DOORS IMPORTANT: DO NOT REMOVE SCREWS FROM LOCATING BLOCKS ON PLATE STRIKE PLATE 1 MARK DOOR for (54mm) bore on face of door, LATCH BOLT and 15/16" (24mm) bore on edge of door approximately 36" ({914mm) above floor. NOTE: LOCK WILL FIT AND FUNCTION PROPERLY IN EITHER A 15/16" (24mm) OR 1" (25.4mm) BORE FOR LATCH BOLT. 2 BORE HOLES (54mm) hole in door face. (boring from both sides of door to prevent earsplitting.
