HOW TO INSTALL POCKET DOOR PRIVACY LOCKS H A R D W A R E TM Privacy Pocket Door Lock 1534 For 1-3/4" Thick Doors Important: Do Not Remove Screws from Locating Blocks on Plate 1. MARK DOOR Mark door for 2-1/8" bore on face of door, and 15/16" bore on edge of door approximately 36" above floor. *NOTE: LOCK WILL FIT AND FUNCTION PROPERLY IN EITHER 15/16" OR 1" BORE FOR LATCH BOLT. 1534 2. BORE HOLES Bore 2-18" hole in door face (Boring from both sides of door to prevent splitting).
