Product Overview
Table Of Contents
Master Catalog 125
Humidity Controls Section W
Product Bulletin W42AA
Issue Date 1088
© 1988 Johnson Controls, Inc.
1
Code No. LIT-125710
W42AA Type
Low or Line Voltage Humidistat
Application
The W42AA humidistat controls
humidifying or dehumidifying
equipment, or both. The
humidistat is a 3-wire device
with single-pole, double-throw,
snap-acting contacts.
A typical W42 application is for
operating an exhaust fan in
electrically heated homes. The
humidistat automatically
operates the exhaust fan to
reduce the relative humidity
when it is above normal. Other
typical applications include
humidity control in fruit storage
rooms, curing rooms and
hospitals where accuracy and
reliability are required.
All series W42 humidistats are
designed for use
only
as
operating controls. Where an
operating control failure
would result in personal injury
and/or loss of property, it is
the responsibility of the
installer to add devices
(safety, limit controls) or
systems (alarm, supervisory
systems) that protect against,
or warn of, control failure.
Features
•
Three-wire SPDT switch
permits control of humidifying
or dehumidifying equipment
or both with one control
•
Stable and accurate human
hair sensing element
•
Easy to read dial is adjustable
over a range of 10 to 90% RH
•
Concealed dial lock screw for
sealed setting
•
Separable mounting plate
with mounting screws
attached, saving installation
time.
•Α
ttractive contemporary
styling
General Description
The W42AA humidistat provides
single pole, double-throw control
for use on low or line voltage
applications.
The humidistat’s terminals are
marked for easy wiring. The “C”
terminal is common. The circuit
between “C” and “L” terminals
closes on a decrease in relative
humidity. The circuit between
“C” and “H” terminals closes on
an increase in relative humidity.
Fig. 1 -- W42AA Humidistat
The humidistat’s sensing
element consists of
approximately 150 strands of
carefully selected and
processed human hair -- proven
to be the most sensitive and
stable material known for
humidity control. An exclusive
tension release device keeps
the hair strands from being
damaged by extreme humidity or
mechanical strain. The sensing
element is mounted vertically to
minimize surface contamination
by dust or foreign material.
The humidistat mounts on a
standard outlet box or directly to
a flat surface where permitted by
electrical codes.
Repairs and Replacement
Field repairs must not be made.
For a replacement humidistat,
contact the nearest Johnson
Controls wholesaler.
Ordering Information
To order, specify W42AA.
Specifications