User Guide

VSD Series II Variable Speed Open Drives Product Bulletin
17
VSD Series II Option Boards
The VSD Series II Drives can accommodate a wide
selection of expander and adapter option boards to
customize the drive for your application needs. The
drive's control unit is designed to accept a total of five
option boards.
The VSD Series II factory installed standard board
configuration includes an A9 I/O board and an A2 relay
output board, which are installed in slots A and B.
Table 27: Option Boards
Description Allowed Slot
Locations
1
Option Number
I/O Cards 3 Relay (Qty 2 Form C relay, qty 1
Form A Relay) (replacement only
- included with Variable Speed
Series II Drive)
B VS-XMX-F1
2 Relay and 1 Thermistor (Not
available with L3 and L4 pilot
light option.) (replaces standard
slot B relay board.)
B VS-XMX-F2
Extended I/O Cards 6 Digital Outputs (DI), 6 Digital
Outputs (DO), 1 ext +24 VDC/EXT
+24 VDC Programmable
D, E VS-XMX-B1
1 Relay Out (RO) Normally
Closed/Normally Open (N.C./
N.O.), 1 RO (N.O.), 1 Thermistor
D, E VS-XMX-B2
1 Analog Input (AI) (mA isolated),
2 Analog Output (AO) (mA
isolated)
D, E VS-XMX-B4
Card - 3 Relay Dry Contact D, E VS-XMX-B5
1 RO (N.O.), 5 DI (42 – 240 VAC
Input)
D, E VS-XMX-B9
Expander IO - 1 AO, 1 DO, 1 RO D, E VS-XMX-BF
SA Bus (JC-VSD Only) D, E VS-XMX-CS
L
ONWORKS Network D, E VS-XMX-C4
1. The option card must be installed in one of the slots listed for that card.