Brochure

ManualsBrandsJohnson Controls ManualsDampers1-1/2" NPT 2-Way Normally Closed Mixing Globe Valve, 9 to 13 psig (28.9 Cv)

WITHOUT AUXILIARY WITH TWO AUXILIARY WITHOUT AUXILIARY WITH TWO AUXILIARY

SWITCHES SWITCHES SWITCHES SWITCHES

SPRING RETURN - STEM UP SPRING RETURN - STEM DOWN

ELECTRIC SPRING RETURN BRASS TRIM VALVE ASSEMBLY SELECTION GUIDE

VG7000 Series Globe Valves

VA7800 SERIES SPRING RETURN ELECTRIC ACTUATOR

• Available in brass trim

• Manual opener

• Controls – hot water, chilled water, glycol

solutions and steam

• Meets requirements of ASME B16.15

class 250

• Long life replaceable ring packing provides

highest reliability and longest life

• Every valve tested for tight shut-off

• Actuator selector switches allow ﬁ eld

conversion from proportional control to

ﬂ oating or on/off control

• Fluid temperature range – 35 to 284°F

(2 to 140°C)

• Steam pressure – 38 psig saturated steam

• 180lb force – provides high shutoff

• Voltage – 20 to 30 VAC, 50/60 Hz,

11 VA maximum

VA7800 Series actuators are shipped set up for 0 to 10 VDC Proportional Control. The actuators can be changed in the ﬁ eld to on/off control, ﬂ oating control or to a 4 to 20 mA

proportional control signal by adjusting the DIP switch settings.

VALVE SIZE Cv CLOSEOFF VA7820-HGA-2 VA7820-HGC-2 VA7830-HGA-2 VA7830-HGC-2

IN. PSIG

TWO-WAY PUSH-DOWN-TO-CLOSE (NORMALLY OPEN) – NPT END CONNECTIONS

VG7241CT 1/2 0.73 345 VG7241CT+72CHGA VG7241CT+72CHGC

VG7241ET 1/2 1.8 345 VG7241ET+72CHGA VG7241ET+72CHGC

VG7241GT 1/2 4.6 345 VG7241GT+72CHGA VG7241GT+72CHGC

VG7241LT 3/4 7.3 289 VG7241LT+72CHGA VG7241LT+72CHGC

VG7241NT 1 11.6 182 VG7241NT+72CHGA VG7241NT+72CHGC

VG7241PT 1-1/4 18.5 111 VG7241PT+72CHGA VG7241PT+72CHGC

VG7241RT 1-1/2 28.9 71 VG7241RT+72CHGA VG7241RT+72CHGC

VG7241ST 2 46.2 46 VG7241ST+72CHGA VG7241ST+72CHGC

TWO-WAY PUSH-DOWN-TO-OPEN (NORMALLY CLOSED) – NPT END CONNECTIONS

VG7441CT 1/2 0.73 345 VG7441CT+72CHGA VG7441CT+72CHGC

VG7441ET 1/2 1.8 345 VG7441ET+72CHGA VG7441ET+72CHGC

VG7441GT 1/2 4.6 345 VG7441GT+72CHGA VG7441GT+72CHGC

VG7441LT 3/4 7.3 321 VG7441LT+72CHGA VG7441LT+72CHGC

VG7441NT 1 11.6 213 VG7441NT+72CHGA VG7441NT+72CHGC

VG7441PT 1-1/4 18.5 122 VG7441PT+72CHGA VG7441PT+72CHGC

VG7441RT 1-1/2 28.9 76 VG7441RT+72CHGA VG7441RT+72CHGC

VG7441ST 2 46.2 47 VG7441ST+72CHGA VG7441ST+72CHGC

THREE-WAY MIXING – NPT END CONNECTIONS

VG7842CT 1/2 0.73 345/345 VG7842CT+72CHGA VG7842CT+72CHGC VG7842CT+74CHGA VG7842CT+74CHGC

VG7842ET 1/2 1.8 345/345 VG7842ET+72CHGA VG7842ET+72CHGC VG7842ET+74CHGA VG7842ET+74CHGC

VG7842GT 1/2 4.6 345/345 VG7842GT+72CHGA VG7842GT+72CHGC VG7842GT+74CHGA VG7842GT+74CHGC

VG7842LT 3/4 7.3 289/321 VG7842LT+72CHGA VG7842LT+72CHGC VG7842LT+74CHGA VG7842LT+74CHGC

VG7842NT 1 11.6 182/213 VG7842NT+72CHGA VG7842NT+72CHGC VG7842NT+74CHGA VG7842NT+74CHGC

VG7842PT 1-1/4 18.5 111/122 VG7842PT+72CHGA VG7842PT+72CHGC VG7842PT+74CHGA VG7842PT+74CHGC

VG7842RT 1-1/2 28.9 71/76 VG7842RT+72CHGA VG7842RT+72CHGC VG7842RT+74CHGA VG7842RT+74CHGC

VG7842ST 2 46.2 46/47 VG7842ST+72CHGA VG7842ST+72CHGC VG7842ST+74CHGA VG7842ST+74CHGC