Product Overview

VG1000 Series Forged Brass Ball Valves Product Bulletin40
Note: To avoid excessive wear or drive time on the
motor for VA9104, M9104, M9106 and M9109 AGx
models, use a controller and/or software that provides
a timeout function to remove the signal at the end of
rotation (stall). The IGx and GGx models have an auto
shutoff to avoid excessive wear or drive time on the
motor.
For more information on these electric actuator series
as well as details on models available, refer to the
following documents:
• VA9104-xGA-2S, -3S Series Electric Non-Spring
Return Valve Actuators Product Bulletin
(LIT-12011050)
• M9104-xGA-2S, -3S Series Electric Non-Spring
Return Actuators Product Bulletin (LIT-1201742)
• M9106 Series Electric Non-Spring Return
Actuators Product Bulletin (LIT-2681123)
• M9109 Series Electric Non-spring Return
Actuators Product Bulletin (LIT-120112)
• VA9203 Series Electric Spring Return Actuator
Product Bulletin (LIT-12011702)
• VA9208 Series Electric Spring Return Actuator
Product Bulletin (LIT-12011622)
Linkage Kit and Weather Shield Selection
The M9000-551 and M9000-561 Valve Linkage Kits
and M9000-341 Weather Shield are designed
specifically for field mounting Johnson Controls
M(VA)9104 Series Non-Spring Return and M(VA)9203
and M(VA)9208 Series Spring Return Electric Actuators
to VG1000 Series Ball Valves.
For more information on the M9000-520 Linkage Kit,
refer to the M9000-520 Ball Valve Linkage Kit Product
Bulletin (LIT-1201547) or the M9000-520 Ball Valve
Linkage Kit Installation Instructions
(Part No.14-1297-5).
For more information on the M9000-551 Linkage Kit,
refer to the M9000-551 Ball Valve Linkage
Kit Installation Instructions (Part No. 34-636-1816).
For more information on the M9000-330 Weather
Shield, refer to the M9000-330 and M9000-340 Series
Weather Shield Enclosures Installation Instructions
(Part No. 14-1330-26).
For more information on the M9000-341 Weather
Shield, refer to the M9000-341 Valve Weather Shield
Kit Installation Instructions (Part No. 34-636-2235).
For more information on the M9000-560 Ball Valve
Linkage, refer to the M9000-560 Ball Valve Linkage Kit
and M9000-561 Thermal Barrier Installation
Instructions (Part No. 34-636-2227).
Table 36: Valid Ball Valve, Electric Actuator, Linkage Kit, and Weather Shield Combinations (for Assembly
in the Field) (Part 1 of 3)
Valve Size,
in. (DN)
Valve Code Numbers Actuator
Base
Number
1
Linkage Kit
Code Number
Weather
Shield
NPT End
Connection
Sweat End
Connection
Press End
Connection
1/2 (DN15) VG1241Ax
VG1245Ax
VG1841Ax
VG1845Ax
VG1275Ax
VG1875Ax
VG1291Ax
VG1295Ax
VG1891Ax
VG1895Ax
VA9104
2
None Required
(Fluid Temperature
212°F)
M9000-341
M9000-561
(Fluid Temperature
284°F)
M9104 M9000-551
(Fluid Temperature
212°F)
M9000-341
M9106 M9000-520
M9108 M9000-516 M9000-330
VA9203 None Required
(Fluid Temperature
212°F)
M9000-341
M9000-561
(Fluid Temperature
284°F)