Product Overview

VG1000 Series Forged Brass Ball Valves Product Bulletin 35
Application Overview
Available in sizes 1/2 through 2 in. (DN15 through
DN50), VG1000 Series Ball Valves are designed
specifically for automated commercial HVAC service.
These valves feature a forged brass body with either a
chrome-plated brass ball for water or glycol solutions to
203F (95C), or a 300 Series stainless steel ball for
high temperature water to 284°F (140°C) and saturated
steam to 15 psi. The Amodel Flow Characterizing Disk
maintains equal percentage flow characteristics for
optimum temperature control, as shown in Figure 2.
The blowout-proof stem and mounting flange,
combined with an innovative double O-ring stem seal
and self-centering stem bushing design (shown in
Figure 3) provide quick and easy electric actuator field
mounting while ensuring long life and leak-free valve
performance. The specially engineered,
graphite-reinforced PTFE seat with flexible PTFE
seat.design (backed with EPDM O-rings) significantly
reduces the operating torque, allowing the smallest
possible electric actuator available to provide the force
required for the specific application. All valve and
actuator assemblies provide 200 psig (1,379 kPa)
closeoff pressure while ensuring operation after long
idle periods. Because of their cost-effective, reliable
design, VG1000 Series Ball Valves are maintenance
free.
VA9000 Series Electric Actuators include mounting
hardware for direct coupling to VG1000 Series Ball
Valves. M9000 Series Electric Actuators require
additional Valve Linkage Kits. See Table 32 for valid
valve, actuator, and linkage kit combinations for
assembly in the field.
VG1000 Series Ball Valves are designed for factory or
field mounting to a wide variety of Johnson Controls®
M9000 and VA9000 Series Electric Actuators. Control
signal selections include:
• floating point without timeout
• on/off and floating point
• on/off
• proportional
Table 34: Shipping Weights, lb (kg)
Valve Code
Number
Description
Shipping Weight,
lb (kg)
VG12xxAx 1/2 in. (DN15) Two-Way Forged Brass Ball Valve 0.8 (0.4)
VG12xxBx 3/4 in. (DN20) Two-Way Forged Brass Ball Valve 1.0 (0.5)
VG12xxCx 1 in. (DN25) Two-Way Forged Brass Ball Valve 1.8 (0.8)
VG12xxDx 1-1/4 in. (DN32) Two-Way Forged Brass Ball Valve 2.3 (1.0)
VG12xxEx 1-1/2 in. (DN40) Two-Way Forged Brass Ball Valve 3.8 (1.7)
VG12xxFx 2 in. (DN50) Two-Way Forged Brass Ball Valve 5.0 (2.3)
VG18xxAx 1/2 in. (DN15) Three-Way Forged Brass Ball Valve 1.25 (0.6)
VG18xxBx 3/4 in. (DN20) Three-Way Forged Brass Ball Valve 1.5 (0.7)
VG18xxCx 1 in. (DN25) Three-Way Forged Brass Ball Valve 2.75 (1.3)
VG18xxDx 1-1/4 in. (DN32) Three-Way Forged Brass Ball Valve 4.25 (1.9)
VG18xxEx 1-1/2 in. (DN40) Three-Way Forged Brass Ball Valve 6.25 (2.8)
VG18xxFx 2 in. (DN50) Three-Way Forged Brass Ball Valve 8.2 (3.7)
Table 35: Repair Parts
Linkage Replacement Description
Replacement Part
Code Number
M9000-520
Anti-Rotation Slider, Includes Carriage Screw, Washers, and Wing Nut M9000-600
Mounting Screws and Nuts; Includes Four M5 (5 mm) x 16 mm Machine Screws and
Four M5 (5 mm) Serrated Washer Head Nuts
M9000-601
Drive Shaft M9000-602
Manual Handle; Includes Handle and a No. 4 Thread-Forming PLASTITE Screw M9000-603
M9000-551
Linkage with Handle for VA9104 Series Actuators Unit Replacement
M9000-560
Linkage for VA9203/VA9208 Series Actuators Unit Replacement
M9000-561
Thermal Barrier for VA9104/VA9203/VA9208 Series Actuators Unit Replacement