Brochure

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
3 of 3
VG1000 Series Three-Way, Plated Brass Trim, NPT End Connections Ball Valves with
Non-Spring Return Electric Actuators (Continued)
Technical Specifications
VG1000 Three-Way, Plated Brass Trim Ball Valves with Non-Spring Return Electric Actuators
Service
1
1. Proper water treatment is recommended; refer to the VDI 2035 Standard.
Hot Water, Chilled Water, and 50/50 Glycol Solutions for HVAC Systems
Valve Fluid Temperature Limits Water 23 to 203°F (-5 to 95°C)
Steam Not Rated for Steam Service
Maximum Actuator Fluid
Temperature Limit
203°F (95°C) VA9104
M9104 with M9000-551 Linkage
M9106 or M9109 with M9000-520 Linkage
Valve Body Pressure Rating Water 580 psig (3,996 kPa) (PN40)
Steam Not Rated for Steam Service
Maximum Closeoff Pressure 200 psig (1,378 kPa)
Maximum Recommended Operating Pressure Drop 50 psi Maximum Differential Pressure for Valves with Characterized Flow Control Disk and
30 psi Maximum for Quiet Service Ball Valves
Flow Characteristics Three-Way Equal Percentage Flow Characteristics of In-line Port A (Coil) and
Linear Flow Characteristics of Angle Port B (Bypass)
Rangeability
2
2. Rangeability is defined as the ratio of maximum controllable flow to minimum controllable flow.
Greater than 500:1
Minimum Ambient Operating Temperature -4°F (-20°C)
Maximum Ambient
Operating Temperature (Limited by
the Actuator and Linkage)
140° (60°C) VA9104 Series Non-Spring Return Actuators
M9104 Series Non-Spring Return Actuators with M9000-551 Linkage
125° (52°C) M9106 and M9109 Series Non-Spring Return Actuators with M9000-520 Linkage
Leakage 0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4
End Connections National Pipe Thread (NPT)
Materials Body Forged Brass
Ball Chrome Plated Brass
Blowout-Proof Stem Nickel Plated Brass
Seats Graphite-Reinforced PTFE with Ethylene Propylene Diene Monomer (EPDM) O-Ring
Backing
Stem Seals EPDM Double O-Rings
Characterizing Disk Amodel
® As-1145hs Polyphthalamide Resin