Actuator Install Instructions

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc.
www.johnsoncontrols.com
2 of 2
Electric Non-Spring Return Valve Actuators (Continued)
Accessories (Order Separately)
Technical Specifications
Code Number Description
M9000-200 Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional, and/or Resistive Electric Actuators
M9000-341 Weather Shield Kit for VG1000 Series Ball application of VA9104, M(VA) 9203, and M(VA)9208 Series Electric Non-Spring Return
Actuators (quantity 1)
M9000-551 Mounting Hardware Replacement Kit (quantity 1)
M9000-561 Thermal Barrier Kit for M9000-551 and M9000-560 Ball Valve Linkages. Extends the VA9104, M(VA) 9203, and M(VA)9208 Series
Electric Non-Spring Return Actuators applications to include low pressure steam (quantity 1).
VA9104-xGA-2S, -3S Series Electric Non-Spring Return Valve Actuators
Power Requirements AC 24 V +25%/-20% at 50/60 Hz, 2.1 VA Supply, Class 2 or Safety Extra-Low Voltage (SELV)
Control Type VA9104-AGA-xS Floating Control without Timeout
VA9104-GGA-xS Proportional Control
VA9104-IGA-xS Floating or On/Off Control with Timeout
Control Signal VA9104-AGA-xS AC 24 V +25%/-20% at 50/60 Hz, Class 2 or SELV Without Timeout
VA9104-GGA-xS DC 0 (2) to 10 V or 0 (4) to 20 mA With Field Furnished 500 ohm Resistor
VA9104-IGA-xS AC 24 V +25%/-20% at 50/60 Hz, Class 2 or SELV With Timeout
Control Input Impedance VA9104-GGA-xS Voltage Input: 200,000 ohms
Current Input: 500 ohms With Field Furnished 500 ohm Resistor
Running Torque 35 lb
⋅in (4 N⋅m)
Travel Time 60 Seconds at 60 Hz (72 Seconds at 50 Hz) for 90° of Rotation
Rotation Range 93° ±3°, CW or CCW
Cycles 100,000 Full Stroke Cycles; 2,500,000 Repositions at Rated Running Torque
Audible Noise Rating 35 dBA Nominal at 39-13/32 in. (1 m)
Electrical Connections VA9104-xGA-2S 48 in. (1.2 m) UL 444 Type CMP Plenum Rated cable with 19 AWG (0.75 mm
2
) conductors and
0.25 in. (6 mm) ferrule ends and connector for 3/8 in. (9.5 mm) flexible metal conduit.
VA9104-xGA-3S M3 Screw Terminals (Requires a Slotted Screwdriver)
Enclosure VA9104-xGA-2S NEMA 2, IP42
VA9104-xGA-3S NEMA 1, IP40
Ambient Conditions Operating -4 to 140°F (-20 to 60°C); 90% RH Maximum, Noncondensing
Storage -20 to 150°F (-29 to 66°C); 90% RH Maximum, Noncondensing
Fluid Temperature Limits
(Actuator and Valve Assembly)
VG12x1 and VG18x1 Series 23 to 203°F (-5 to 95°C)
VG12x5 and VG18x5 Series -22 to 212°F (-30 to 100°C)
VG12x5 and VG18x5 Series
With M9000-561 Thermal
Barrier Installed
-22 to 284°F (-30 to 140°C) water; 15 psig (103 kPa) at 250°F (121°C) Saturated Steam
Compliance United States UL Listed, CCN XAPX, File E27734; to UL 60730-1A: 2003-08, Ed. 3.1, Automatic Electrical
Controls for Household and Similar Use; and UL 60730-2-14: 2002-02, Ed. 1, Part 2 Particular
Requirements for Electric Actuators
Canada UL Listed, CCN XAPX7, File E27734; to UL 60730-1:02-CAN/CSA: July 2002, 3rd Ed.,
Automatic Electrical Controls for Household and Similar Use; and CSA C22.2 No. 24-93
Temperature Indicating and Regulating Equipment
Europe CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive 2004/108/EC and
Low Voltage Directive 2006/95/EC.
Australia and New Zealand C-Tick Mark, Australia/NZ Emissions Compliant
Shipping Weight 1.25 lb (0.55 kg)