Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–73
Direct Mount Actuator Accessories (Continued)
Electric Damper Actuators
Code Number
Description
1
Qty
(M9000-271.tif)
M9000-271 Remote mounting kit (vertical) with crankarm and damper linkage
(for use with D1300 dampers only)
1
(M9000_400.jpg)
M9000-400 Jackshaft mounting kit, Ø 0.5 to 1.05 in. 1
(M9000_402.jpg)
M9000-402 Replacement hardware for M9000-400 jackshaft mounting kit 1
(M9000_605.jpg)
M9000-605 Ball joint for Ø 1/4 and Ø 5/16 in. rods,
5/16-24 x 33/64 in. thread mount
5
(M9220-605.tif)
M9220-605 Ball joint for M8x1.25 threaded rod, M8x1.25 x 16.5 mm thread
mount
5
Valve Linkages
(M9000-518.tif)
M9000-519 Ball valve linkage for spring return, 2-1/2 to 4 in. VG1000 flanged
valves with 11 mm square stem
1
(M9000-531.tif)
M9000-530 VG2000 linkage kit for M9220 Series electric actuator and
Johnson Controls 2-1/2 in. cast iron globe valves with
3/8 in. stems
1
M9000-531 VG2000 linkage kit for a single M9220 Series electric actuator and
Johnson Controls 3 in. and 4 in. cast iron globe valves with 3/8 in.
stems
1
M9000-533 VG2000 linkage kit for a single M9220 Series electric actuator and
Johnson Controls 5 in. cast iron globe valves with 1/2 in. stems
1
M9000-535 VG2000 linkage kit for a single M9220 Series electric actuator and
Johnson Controls 6 in. cast iron globe valves with 1/2 in. stems
1
M9220 Series Actuator Accessories (Part 3 of 4)
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators