Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–71
Direct Mount Actuator Accessories (Continued)
Electric Damper Actuators
M9220 Series Actuator Accessories (Part 1 of 4)
Code Number
Description
1
Qty
Shaft Couplers / Position Indicators
(M9000-611.tif)
M9000-611 Position indicators for use with M9220 Series actuators 5
(M9220-600A.tif)
M9220-600 Jackshaft coupler kit for use with M9220 Series actuators
Ø 3/4 in. to 1-1/16 in. (19 to 27 mm) round shafts;
or 5/8 and 3/4 in. (16, 18 and 19 mm) square shafts
1
(M9220-601.tif)
M9220-601 Standard coupler kit for use with M9220 Series actuators
Ø 1/2 to 3/4 in. (12 to 19 mm) round shafts;
or 3/8 and 1/2 in. (10, 12 and 14 mm) square shafts
1
(M9220-602.tif)
M9220-602 Retainer for M9220 coupler 5
(M9220-610.tif)
(M9220-602.tif)
M9220-610 10 mm square shaft adapter with retainer 1
M9220-612 12 mm square shaft adapter with retainer 1
M9220-614 14 mm square shaft adapter with retainer 1
Mounting Brackets
(M9000-152.tif)
M9000-152 Reinforcing plate for mounting to thin sheet metal 1
(M9000-158.tif)
M9000-158 Tandem mounting bracket 1
M9220-BAC-3
(M9220-BAC-3.tif)
M9220 Series Actuator Accessories
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators