Brochure

Table Of Contents
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc.
www.johnsoncontrols.com
V–61
Direct Mount Actuator Accessories (Continued)
Electric Damper Actuators
(DMPR-KC100.tif)
DMPR-KC100 Damper blade linkage (for use with D1300 dampers only) 1
(DMPR-KC102.tif)
DMPR-KC102 Damper push rod, Ø 5/16 x 48 in. 1
(DMPR-KC260.tif)
DMPR-KC254 Damper mount linkage kit (for use with D1300 dampers only) 1
(DMPR-KC300)
DMPR-KC300 Ball joint for Ø 5/16 in. rod, 1/4-20 x 9/16 in. thread mount 10
(M9000-150.tif)
M9000-150 Damper mounting kit for remote, inside-duct mounting an M9108
(16) (24) Series actuator to a three-blade or larger damper
1
(from LIT-1900167)
(M9000-151.tif)
M9000-151 Remote mounting kit, with crankarm and damper linkage for M9108
(16) (24) Series actuators
Use the M9000-151 linkage only on three-blade or larger dampers
(not for use with M9132 Series actuators or tandem applications)
1
(M9000-153.tif)
M9000-153 Crankarm kit
(not for use with M9132 Series actuators or tandem applications)
1
(M9000_400.jpg)
M9000-400 Jackshaft mounting kit, Ø 0.5 to 1.05 in. 1
(M9000_402.jpg)
M9000-402 Replacement hardware for M9000-400 jackshaft mounting kit 1
M9108, M9116, M9124, and M9132 Series Actuator Accessories (Part 2 of 4)
Code Number
Description
1
Qty
Electric Damper ActuatorsElectric Damper ActuatorsElectric Damper ActuatorsElectric Damper Actuators